Smeg CIR34XS Návod k použití stáhnout pdf (Strana 12)

Instructions for the installer

5.2 Removing the hob (models with built-in control panel)

1. Remove the knobs, the griddles, the burner caps, the flame caps

and the two rear plugs;

2. Remove the screws “A” which fix the burner supports;

3. Raise the hob, sliding it off the ignition plugs and/or the

thermocouples and the gas tap rods;

5.3 Adjustment for ULPG

Check that the connection has been made as described in the “Gas

connection” section.

Undo the screw “D” and push the air regulator “C” fully down. Use a

spanner to remove the nozzles “B” and fit those of suitable type

following the instructions given in the tables for bottled gas ULPG 2.75

kPa. The nozzle must not be tightened to a torque of over 3 Nm.

ULPG – 2.75 kPa

Nominal gas Injector

Burner

Consumption (mm)

(MJ/h)

Auxiliary 4.8 0.60

Semi-rapid 5.9 0.65

Rapid 8.6 0.77

Rapid large 9.5 0.85

Fish pan 9.5 0.85

Wok 15.0 1.05

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Žádné komentáře

Smeg CIR34XS Návod k použití Strana 12